How To Service A Paslode Framing Nailer

Zippo is more annoying than your nail gun leaving your side in the middle of a tedious project. Notwithstanding, having some patience might help. Common issues include smash jamming, broken O-Ring, damaged battery, and so on. Hold your horses till the end of this article, and repairing your Paslode boom gun volition be a breeze.

Paslode Nail Gun Issues and Solutions
- Paslode Nail Guns Won't Fire
- The Nails Gun Makes Strange Racket
- The Blast Gun's Firing Pivot Is Bent
- Broken O-Ring
- Damaged Battery Contacts
- Handle Lite Flashing
Frequently Asked Question
- How often should you service a Paslode nail gun?
- How do you take apart a Paslode nail gun?
Decision

Paslode Nail Gun Problems and Solutions

Paslode nail guns are manufactured to withstand working weather condition. Merely machines are non manufactured to use perennially. Here are some reasons for your nailer to stop working every bit it used to. I organized them in such a way that you find the repairing methods right after the troubleshooting.

Paslode Blast Guns Won't Fire

Misfiring is the most common problem of the Paslode smash gun that nosotros well-nigh ordinarily feel. There is no one cause in item of this problem.

Smash Jams

Sometimes nail jams impede the nails from moving forward. Furthermore, dirt and other stuff tin get stuck inside the nailer, which causes misfiring. If this happens, your first liability is to clean the jams.

Clean Boom Gun

Empty Gas Fuel Jail cell

If your gas fuel cell is empty or out-of-appointment, it causes the nails non firing issue. Moreover, if the fuel cell is non fastened accurately, the fasteners may not get into the wood properly. In this case, repair the fuel cell or else remove the entire fuel cell if necessary.

Wrong Fasteners

Choose suitable nails for your nail gun. Otherwise, wrong fasteners get stuck into the magazine and impede them from moving forrard.

Need to be Cleaned

If you lot use your nail gun on a daily basis, it needs to exist cleaned regularly. Otherwise, small dirt from the job site pollutes the magazine that causes misfiring.

The Nails Gun Makes Strange Noise

Sometimes your nail gun may make a strange sound. There is cipher to worry about. Your machine is absolutely alright, and it needs some repairing simply.

A damaged motor can be the cause of this strange noise. Also, if the fan is broken or hits against something within the machine, it causes a weird sound. To bandage bated the trouble, repair the motor and fan or replace them on demand.

Supplant Fan If Necessary

The Smash Gun's Firing Pin Is Bent

If your nail gun dropped somehow, the firing pin might become aptitude. As well, if you lot use incompatible fasteners for your nail gun, it may also bend the pin. To get rid of this problem, cheque out whether whatsoever damage took place or not during the drop. If whatsoever impairment occurred, replace the damaged part. Brand sure you lot utilize compatible fasteners to avoid such problems in the first place.

Broken O-Ring

The next about mutual trouble of the Paslode nail gun is cleaved, damaged, or worn O-Ring. The O-Band is generally located nearly the head valve. It seals the air from leaking. When the O-Ring gets damaged or worn somehow, it causes air leaking. If you are affirmative nigh this existence the effect, removing the O-Ring will most likely solve things.

However, yous have to keep 1 matter in listen. When you lot remove the O-Ring for some reason and do not put information technology back correctly, it might hamper the piece of work efficiency.

Damaged Battery Contacts

While inserting and removing the bombardment of the Paslode Boom Gun, the contacts may have gotten bent. Sometimes, it can be as pocket-sized as the battery contacts existence covered in dirt or grit. As well, the contacts can be suffering from corrosion, such as from water damage.

If yous use non-uniform batteries, information technology may not evangelize the aforementioned performance. It tin can even degrade the power efficiency, causing poor performance even subsequently inserting new batteries. Repair the bombardment contacts or replace the batteries entirely to combat this problem.

Handle Low-cal Flashing

Sometimes the light on the handle of the nail gun is flashing ruby-red and greenish. Information technology indicates that in that location may take been some problem with the nailer. An unstable motor is the master reason for flashing the red and green light on the handle. This warning points that y'all have to either repair or replace the motor.

An electric fault may cause the lights to blink likewise. When the excursion board becomes outdated or has loose wire connections, it makes the light blink or permanently change colour. Find a professional to repair the excursion board or tighten the wiring connexion to get things back to normal.

Frequently Asked Question

How often should you service a Paslode boom gun?

How ofttimes you should service your Paslode nail gun depends on your usage. By and large, Paslode recommends cleaning and lubricating your nailer every l,000 shots. Only it is not definite. If you apply your nail gun in a dirty surroundings or at high nailing speeds for an extended period, it needs to be cleaned earlier than the regular requirement.

How practice yous have apart a Paslode blast gun?

Remove the bombardment from the bottom of the gun past pressing the release push. After that, empty the nail clip past pulling the boom feed downwards. Release the flip catch on the gas canister restraint on the rear of the gun and remove the gas canister.

Determination

It turns out that repairing your Paslode boom gun is not much of a difficult job. Knowing how to keep your patience is more than of import than knowing how to mend it. If you are an amateur, it is forgivable to mess things up.

But be careful during the repair process to make upwards for the mistakes. Simply never try repairing unless you have some DIY knowledge. Practice call a professional instead.